INFORMATIONAMSynths Web SiteManualsSSI Chips
The ARP Synthesizer like the 2600, Odyssey, Axxe and clones such as the TTSH need both gate and trigger signals at 10V to correctly control the ADSR and AR envelope generators. To interface with Euro Rack 5V gate signals you need a Gate Booster which converts any positive going voltage above 2.7V into Gate and 1ms Trigger signals at +10V. There is an LED to show gate output status.The PCB is powered by +/- 15VDC from within your ARP synthesizer, the current draw is low enough for it not to need a separate power supply especially if NO LED or an ultra bright LED is used.
The PCB dimensions are 50mm x 50mm.
proceed to checkout
-------- OR --------