AM1052 Mix Sequncer

8 HP | AM1052 Mix Sequencer | User Manual (PDF) | Modular Grid | You Tube

OVERVIEW The AM1052 Module is a utility module just 8 HP wide that mixes together four signal inputs into one, with optional control from an external clock source or the B1027 Sequencer.

DESCRIPTION The module mixes four signal inputs (audio or CV) into one master output with volume contol. Any input can be manually muted or controlled via gated or seqeuncer control.

The control of the module is located on the lower section of the panel. A three way toggle switch selects the control source:

• GATED - A Eurorack controlled clock
• >> - No clock source is selected
• SEQR - An internal 12-way connection to the B1027 sequencer

In GATED mode the sequence can be reset to position 1 by pressing the red RESET button. If the B1027 is selected a three way slide switch selects how the eight steps of the sequncer are mapped to the four channels;

• 1 : 4 - Outputs 1 to 4 are selected
• 4 : 2 - Ouputs 1 to 4 then 5 to 8 are selected
• 5 : 8 - Outputs 5 to 8 are selected

The green or blue mute buttons on each channel mute the audi or CV from the mixer. 

The module comes with a 10-pin power cable, A12-way ribbob cable for attaching to the B1027 Sequencer, a set of M3 x 8mm mounting screws and washers.

PRODUCT STATUS: IN PRODUCTION