This is module is a replica of the two LFO's, Noise, and Sample & Hold circuits in the Roland SH-5 monophonic synthesizer introduced in 1976. They provide the versatile modulation capabilities that this synthesizer is famous for, and form the left hand section of the main panel. .
Euro Rack Module: 18HP wide
User Manual: Download PDF
The AMSynths circuit is similar to the original and based around the same JFET's and UJT transistors, with 741 and 1458 IC's. LFO-1 is a basic affair with just a sawtooth and inverted sawtooth waveform, whilst LFO-2 has a wider range of waveforms; triangle, square and sine (which can be delayed). There are red LED indicators for LFO-1 (Slider LED) and LFO-2 rate.
A small daughter PCB holds the noise source. A transistor in avalanche mode is used to generate white or pink noise.
The Sample and Hold circuit is driven by its own internal clock (rate set by sample time) and it can sample either LFO-1 sawtooth, LFO-2 triangle or the Noise output. This approach enables the traditional random step waveforms as well as more predictable patterns. The LFO's have a frequency range from 0.1 Hz to 20 Hz.
The panel design uses rotary controls to ensure an accurate value match, with one slide potentiometer for LFO-1 Rate.
There are seven 3.5 mm jack sockets on the base of the front panel:
- LFO-1 output
- LFO-2 triangle
- LFO-2 square
- LFO-2 inverted square
- LFO-2 sine with delay up to 4 seconds
- White or pink Noise
- Sample and Hold Output