SH05 Modules

This is an extended replica of the audio mixer and ring modulator in the Roland SH-5 mono synthesizer. Four audio signals can be mixed together and the fourth signal can be generated by the on-board ring modulator from the first two signal inputs. Each audio signal can be directed to either of two outputs...

This module is a unique and very powerful diode ladder VCF, which has three different modes selected by a front panel slide switch: Low Pass Band Pass High Pass All three modes have voltaged controlled frequency modulation. Frequency Cutoff and Resonance can be adjusted and there are 2x audio inputs...

Description The AM8007 module is a replica of the ADSR and AR envelopes used in the Roland SH-5 analog mono synthesizer from 1976. It use transistors to switch between the various phases of the envelope generator and a JFET transistor to act as an output buffer. The ADSR has a uni-junction transistor...

Description This is replica of the VCO in the Roland SH-5 monophonic synthesizer introduced in 1976. This was Roland first serious attempt at a more stable oscillator using a heated exponential generator and fast CA3130 Op Amps, with a separate Op Amp power supply. It was used in the SH-5 as well as...

This is module is a replica of the two LFO's, Noise, and Sample & Hold circuits in the Roland SH-5 monophonic synthesizer introduced in 1976. They provide the versatile modulation capabilities that this synthesizer is famous for, and form the left hand section of the main panel. Euro Rack Module: 18HP...

This is a VCA module inspired by the Roland SH-5 monophonic synthesizer that was introduced in 1976, with dual audio inputs, two CV inputs to control the level and a stereo output. Euro Rack Module: 10HP wide User Manual: AM8010 Quick Start Manual The AMSynths design has the CA3080 OTA chip as the core...